Intex Best Available Alternate to Pexmor Inflatable Boat

  • Post author:
  • Post comments:0 Comments
  • Reading time:10 mins read

The Pexmor inflatable boat is equipped with six wooden floors. It is flat and solid. You can steadily stand on the Pexmor inflatable boat when fishing. It is very safe whether the Pexmor inflatable boat is cruising or stationary.

Note: As an Amazon Associate, we earn from qualifying purchases.


1. Pexmor inflatable boat (Best Overall)


SEPARATE AIR CHAMBERS – The Pexmor inflatable boat has 3 separate air chambers in the tube, which can ensure safety and stability.

DURABLE MATERIAL – The boat is made of 3x Layer 0.9mm 1100D PVC cloth material, which has wear resistance and sun resistance. High-quality materials allow you to relax and play in the water. Maximum load: 880 lb

PLENTY OF SPACE – Pexmor ship is fairly spacious. It is perfect in case you want to bring your family or friends.

SPECIAL DESIGN – Equipped with two fishing rod holders for the fishing enthusiasts. You can enjoy your free time while fishing. Each Pexmor inflatable boat has a certified nameplate and its designated hull number.


  • Total size: 7.5 ft
  • Inside length: 62.4 inch
  • Total width: 50.4 inch
  • Inside width: 26.4 inch
  • Maximum load: 660 lbs
  • Net weight: 67 lbs
  • Air chambers: 2
  • Maximum power: 4 HP
View on Amazon


2. Intex inflatable boat (Best Alternate Available)

The inflatable boat from Intex has a simple and timeless design. It is inflated with a (included) pump within few minutes and is then ready for use immediately. It is always very stable and calm in the water. Even if it is used for bathing and one person wants to pull himself back into the boat, all other passengers sit safely. There is therefore no risk of the Intex Excursion 4 tipping over in such a situation.

The boat also impresses with its excellent rowing properties. In this way, users can always make good progress on calm and even somewhat choppy waters and can steer the Intex Excursion 4 very well. A buyer reports that he has already taken his dog with him on the four-person rubber dinghy several times. The outer skin also withstood its sharp claws.


With the Boston valve, the Intex Excursion 4 can be filled with air very quickly and emptied again just as quickly. A pump is supplied for this purpose, which must be operated by hand.

Unfortunately, this is quite unstable and can fall apart quickly if you pump too hard. However, in such a case it can also be reassembled quite easily. Caution is therefore advised here. It is better to use a more stable pump for fast pumps.

Otherwise, not much can be done wrong when inflating the boat. Because some numbers are attached to the Intex Excursion 4. Inflating is done in about 15 to 20 minutes at normal speed.

In addition, the two seats must then also be provided with air. Thanks to the high-quality paddles and the excellent location in the water, the Intex Excursion 4 can be steered very easily and precisely, even on troubled lakes and rivers. Overall, the boat offers space for four people. However, it means slim or normally built people.

The two handles always ensure a secure hold and also make it easier to transport the boat. If you want, you can equip the Intex Excursion 4 with an outboard motor with a maximum of 1 kW. As a result, he no longer has to paddle himself and can also navigate choppy waters. The rudder mounts are also very practical. The two inflatable boat paddles make a very robust impression and are 122 cm long.

Operation Area

The boat can be used for many purposes. The seawater-resistant boat skin makes it suitable for trips on lakes, rivers and also in coastal areas. It is very robust and therefore ensures a long service life.

The boat is resistant to gasoline, sun rays, oil and even saltwater. This results in a great many possible uses. If the boat is then equipped with a motor, further areas can be reached without having to use a lot of power.

Acquisition Cost

Compared to other similar inflatable boats, the Intex Excursion 4 is very cheap. Due to the many possible uses, it is suitable for a wide variety of people, such as anglers, divers, swimmers and people who would like to explore new waters.


The inflatable boat convinces with a very good quality and a long service life. All components look very valuable. This also applies to the Boston valves, among other things. They can be opened quickly and reliably to fill the boat and just as quickly closed again to deflate the air and to fold the Intex Excursion 4 and transport it.

The paddles make a very robust impression and are very easy to guide through the water. They have practical screw adjustment nuts so that they can be perfectly adjusted to the size of the user.

The only small point of criticism is the not particularly stable supplied pump. It can fall apart quickly if you pump too hard or too fast. Here it makes sense to order an electric pump as well. The boat itself is made of a very thick rubber / plastic and is very robust. The inflatable seat cushions are installed with fixed hooks inside, so that accidental slipping is not easily possible.

View on Amazon


Intex Excursion 4 accessories: the scope of delivery at a glance

The Intex Excursion 4 is delivered in a set with the following accessories:

  • an accessory bag
  • two¬†fishing brackets
  • two handles
  • Rudder mounts
  • a motor mount
  • two paddles 122 cm
  • a guide and
  • a hand pump

Intex Excursion 4 or Intex Excursion 5: what are the differences?

The Intex Excursion 5 offers space for 5 people whereas the Excursion 4 only has space for four. The former can hold a maximum of 455 kg, the smaller variant 400 kg. In terms of design and overall layout, the two inflatable boats are quite similar.

View on Amazon


The Intex Excursion 4 can be easily inflated and is ready for use within around 20 minutes. It is very calm and stable in the water on all trips. A total of up to four people can be accommodated in the Intex Excursion 4.

View Amazon Products

Leave a Reply